Operation; Optional Accessories; Maintenance - Makita DUB362PT4 Instruction Manual

Installing the long nozzle
Fig.7
To install the long nozzle:
1. Align the small projection of the housing with the
groove of the long nozzle.
2. Slide in the long nozzle, and turn it clockwise until
the triangle markings on the long nozzle and the
housing meet each other.
Fig.8
The length of the nozzle can be adjusted by changing
the locking position.
Installing the extension nozzle/ flat nozzle
(optional accessory)
The extension nozzle / flat nozzle can be installed on
the tip of the long nozzle in the same way as above.
Installing the shoulder strap
(optional accessory)
Fig.9
Hook the shoulder strap onto the hanger of the tool.
Before use, adjust the length of strap so that it is easy to
work with it.

OPERATION

Blowing
Fig.10
CAUTION:
Do not place the blower on the ground while it is
•
switched on. Sand or dust may enter from suction
inlet, and they may result in personal injury.
Hold the blower firmly with a hand and perform the
blowing operation by moving it around slowly.
When blowing around a building, a big stone or a
vehicle, direct the nozzle away from them.
When performing an operation in corner, start from the
corner and then move to wide area.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before attempting to
perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
Cleaning
Fig.11
From time to time, wipe off the outside of the tool using
a cloth dampened in soapy water.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Makita genuine battery and charger
•
Shoulder belt
•
Extension nozzle
•
Flat nozzle
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
8
or attachments
Only use accessory or
are