View Or Change Advanced Wifi Settings; Use The Router As A Wifi Access Point - NETGEAR Orbi RBK852 User Manual

View or Change Advanced WiFi Settings

To view or change advanced WiFi settings:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
Note: The backhaul password is a security key that is used in WiFi communication
between the router and the satellite. For information about generating a new backhaul
password, see Generate a New Backhaul Password on page 79.
5. In the Region list,- select your region.
In some locations, you cannot change this setting.
6. To control the SSID broadcast, select or clear the Enable SSID Broadcast check
box.
When this check box is selected, the router broadcasts its network name (SSID) so
that it displays when you scan for local WiFi networks on your computer or WiFi
device.
7. Click the Apply button.
Your settings are saved.

Use the Router as a WiFi Access Point

You can set up the router to run as an access point (AP) on the same local network as
another router or gateway.
Specify Network Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
77 User Manual