Connect Your Router - NETGEAR Orbi RBK852 User Manual

Table 4. Satellite LED behavior (Continued)
LED color
Magenta
Off

Connect Your Router

Power on your router and connect it to a modem.
To cable your router:
1. Unplug your modem's power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3. Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5. If the Power LED does not light, make sure that the power adapter is properly
connected to your router and power outlet.
Overview
Orbi Whole Home Tri-Band Mesh WiFi 6 System
Description
The satellite failed to sync with the router.
The satellite synced with the router and is
working normally.
13 User Manual