Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita UR008GD201
Summary of Contents for Makita UR008GD201
- Page 1 INSTRUCTION MANUAL Cordless Grass Trimmer UR008G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: UR008G Handle type Loop handle No load speed 3: 0 - 5,000 min (at each rotation speed level) 2: 0 - 4,600 min 1: 0 - 4,000 min Overall length 1,803 mm (without cutting tool and battery) Nylon cord diameter 2.0 - 2.4 mm Applicable cutting tool and Nylon cutting head... -
Page 3: Safety Warnings
Vibration Applicable standard : ISO22867(ISO11806-1) Cutting tool Left hand Right hand (m/s Uncertainty K (m/s Uncertainty K (m/s (m/s Nylon cutting head NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and may be used for comparing one tool with another. NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure. - Page 4 Do not expose power tools to rain or wet con- ditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
-
Page 5: Intended Use
General instructions Battery tool use and care Recharge only with the charger specified by Never allow people unfamiliar with these the manufacturer. A charger that is suitable for instructions, people (including children) with one type of battery pack may create a risk of fire reduced physical, sensory or mental capabil- when used with another battery pack. -
Page 6: Putting Into Operation
During operation, keep bystanders or animals 14. If the battery cartridge gets wet, drain the at least 15 m away from the tool. Stop the tool water inside and then wipe it with a dry cloth. as soon as someone approaches. Dry the battery cartridge completely in a dry place before use. -
Page 7: Cutting Tools
If the tool gets heavy impact or fall, check the 26. Avoid working in poor environment where condition before continuing work. Check the increased user fatigue is expected. controls and safety devices for malfunction. If 27. Do not use the tool in bad weather where visi- there is any damage or doubt, ask our autho- bility is limited. -
Page 8: First Aid
Always wear protective gloves when handling WARNING: DO NOT let comfort or familiarity the cutting tool. with product (gained from repeated use) replace Always clean dust and dirt off the tool. Never strict adherence to safety rules for the subject use gasoline, benzine, thinner, alcohol or the product. - Page 9 Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum...
-
Page 10: Parts Description
PARTS DESCRIPTION Speed indicator ADT indicator Caution lamp Main power button (ADT = Automatic Torque Drive Technology) Reverse button Battery cartridge Lock-off lever Switch trigger Hanger Handle Protector Shoulder harness 10 ENGLISH... -
Page 11: Functional Description
Tool / battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a tool/battery protection system. This system automatically cuts off power to WARNING: Always be sure that the tool is the motor to extend tool and battery life. The tool will switched off and the battery cartridge is removed automatically stop during operation if the tool is placed before adjusting or checking function on the tool. -
Page 12: Main Power Switch
Indicating the remaining battery Main power switch capacity Tap the main power button to turn on the tool. To turn off the tool, press and hold the main power Press the check button on the battery cartridge to indi- button until the speed indicator goes off. cate the remaining battery capacity. - Page 13 To prevent the switch trigger from being accidentally Automatic Torque Drive Technology pulled, a lock-off lever is provided. To start the tool, depress the lock-off lever and pull the switch trigger. When you turn on the Automatic Torque Drive The tool speed increases by increasing pressure on the Technology (ADT), the tool runs at optimum rotation switch trigger.
-
Page 14: Electronic Function
Hex wrench storage NOTE: During the reverse rotation, the tool operates only for a short period of time and then automatically stops. NOTE: Once the tool is stopped, the rotation returns CAUTION: Be careful not to leave the hex to regular direction when you start the tool again. wrench inserted in the tool head. -
Page 15: Nylon Cutting Head
Nylon cutting head Installing the protector NOTICE: Be sure to use genuine Makita nylon WARNING: Never use the tool without the cutting head. guard illustrated in place. Failure to do so can cause serious personal injury. CAUTION: Take care not to injure yourself on the cutter for cutting the nylon cord. -
Page 16: Operation
Makita. If you put on the shoulder harness included in the tool package and the shoulder harness of the back-... -
Page 17: Cleaning The Tool
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 17 ENGLISH... - Page 18 95-M10L 100 mm 80 mm 18 ENGLISH...
-
Page 19: Troubleshooting
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. -
Page 20: Optional Accessories
CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.