Page 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
Use this and other machinery with caution and respect. Failure to do so could result in serious per- sonal injury, damage to equipment, or poor work results. Model T33150/T33151 (Mfd. Since 03/22)
Carbon Filter Primary/ HEPA Filter Bolt Exhaust Port & Filter Handle Access Door Lock Knob Control Panel Pre-Filter (Model T33151 shown) To reduce your risk of serious injury, read this entire manual BEFORE using machine. Model T33150/T33151 (Mfd. Since 03/22)
Figure 1. Control panel. A. Digital Readout: Displays time setting or fan speed setting (depending on which indicator is illuminated). B. Air Quality Sensors: Detect amount of particulate matter (PM ) and/or volatile organic compounds (VOC) in air. Model T33150/T33151 (Mfd. Since 03/22)
Page 7
K. on/off Button: Powers machine ON or OFF. Fan Button: Cycles through fan speed set- tings as indicated on digital readout. — T33150: Speed settings 1 (400 CFM), 2 (500 CFM), and 3 (620 CFM). — T33151: Speed settings 1 (800 CFM), 2 (1000 CFM), 3 (1200 CFM), 4 (1300 Figure 3.
MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL T33150 ADVANCED HANGING AIR FILTER ‐ SMALL Product Dimensions: Weight................................34 lbs. Width (side-to-side) x Depth (front-to-back) x Height............17-1/2 x 21-1/2 x 12-1/2 in.
Page 9
The information contained herein is deemed accurate as of 3/17/2022 and represents our most recent product specifications. Model T33150 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model T33150/T33151 (Mfd. Since 03/22)
The information contained herein is deemed accurate as of 3/17/2022 and represents our most recent product specifications. Model T33151 PAGE 1 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model T33150/T33151 (Mfd. Since 03/22)
Page 11
The information contained herein is deemed accurate as of 3/17/2022 and represents our most recent product specifications. Model T33151 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model T33150/T33151 (Mfd. Since 03/22)
Never operate under the influence of drugs or injury or blindness from flying particles. Everyday alcohol, when tired, or when distracted. eyeglasses are NOT approved safety glasses. -10- Model T33150/T33151 (Mfd. Since 03/22)
Page 13
Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. -11- Model T33150/T33151 (Mfd. Since 03/22)
For your own safety and protection of T33150 Full-Load Current Rating ..2 Amps property, consult an electrician if you are T33151 Full-Load Current Rating ..2.8 Amps unsure about wiring practices or electrical codes in your area.
Page 16
Two-prong outlets do not meet the grounding requirements for this machine. Do not modify or use an adapter on the plug provided—if it will not fit the outlet, have a qualified electrician install the proper outlet with a verified ground. -14- Model T33150/T33151 (Mfd. Since 03/22)
D. Flange Nuts ⁄ "-20 ........4 E. Rubber Feet M6-1 x 20 ......4 you are completely satisfied with the machine and have resolved any issues between Grizzly or the Phillips Head Screws ⁄ "-20 x ⁄ " ....2 shipping agent.
Before beginning the assembly process, refer to Needed for Setup and gather all listed items. 110V To assemble machine: (Power Connection) Figure 8. T33150 minimum working clearances. Install handle using (2) ⁄ "-20 x ⁄ " Phillips head screws (see Figure 7).
Figure 9) to turn machine ON. Motor should Turn machine OFF using on/off button on run smoothly without unusual problems or remote. noises. Press on/off button on control panel to turn machine OFF. Congratulations! Test run is complete. -17- Model T33150/T33151 (Mfd. Since 03/22)
The Models T33150 and T33151 can both be hung from the ceiling with the included eye bolts. However, the T33150 also includes rubber feet, so the machine can be placed on a bench or table for easy access.
Page 22
Ignoring this caution can result in injury or property damage. Eye Bolt (1 of 4) Hex Nut (1 of 4) Figure 14. Installing/adjusting eye bolt. -20- Model T33150/T33151 (Mfd. Since 03/22)
Page 23
Ceiling Joist Hook Figure 15. Eye bolts installed. Bolts Figure 16. Air filter mounted to joists. -21- Model T33150/T33151 (Mfd. Since 03/22)
The air filters can be set to operate in varying air trade magazines, or websites. flow speeds measured in cubic feet per minute (CFM): — T33150 Speed Settings: 1 (400 CFM), 2 To reduce your risk of (500 CFM), and 3 (620 CFM). serious injury, read this...
When used in conjunction with an efficient dust the volume by the speed (CFM) you have collection system, the Model T33150 and T33151 chosen to operate the air filter. This will give remove most fine wood particles up to 0.3 microns you how many minutes it takes to recirculate from the air.
T33226 T33232—Replacement Remote Control for T33150 and T33151 This infrared controller serves as a replacement T33227 for the Model T33150 and T33151 remote control. Figure 18. Replacement filters for Model T33150. Replacement Filters for T33151 T33229—Pre-Filter T33230—Primary Filter, HEPA T33231—Secondary Filter, Activated Carbon T33229 Figure 17.
Page 27
T33228—4" Intake Port Reducer for T33150 G1028Z2—1 ⁄ HP Portable Dust Collector Use this adapter to convert the Model T33150 Designed to capture dust and wood chips from intake to be compatible with receiving a 4" hose. woodworking machines, such as table saws, joint- Only available for the Model T33150.
Secondary Filter When the air filter is not in use, unplug the power Figure 26. Location of secondary filter on T33150. cord from the power source. Secure the power cord away from potential hazards, such as high traffic areas, sharp objects, heat sources, harsh chemicals or fumes, damp areas, etc.
1. Clean filters; replace with new filters if performance adequately does not improve (Page 26). collect dust; poor 2. Air filter not positioned properly. 2. Locate filter in area with good air circulation and away from any obstructions (Page 18). performance. -28- Model T33150/T33151 (Mfd. Since 03/22)
Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -29- Model T33150/T33151 (Mfd. Since 03/22)
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. T33150 Main 25 24 BUY PARTS ONLINE AT GRIZZLY.COM! -32- Model T33150/T33151 (Mfd.
Page 35
34 PT33150034 LOCK NUT M4-.7 18 PT33150018 MOTOR 1/6HP 110V 1-PH 35 PT33150035 GROMMET 10 X 19 X 4MM 19 PT33150019 STEEL IMPELLER BUY PARTS ONLINE AT GRIZZLY.COM! -33- Model T33150/T33151 (Mfd. Since 03/22) Scan QR code to visit our Parts Store.
35 PT33151035 PHLP HD SCR 10-24 X 3/8 18 PT33151018 CAPACITOR COVER 36 PT33151036 GROMMET 10 X 19 X 4MM 19 PT33151019 PHLP HD SCR 3/16-24 X 3/4 BUY PARTS ONLINE AT GRIZZLY.COM! -34- Model T33150/T33151 (Mfd. Since 03/22) Scan QR code to visit our Parts Store.
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. BUY PARTS ONLINE AT GRIZZLY.COM! -35- Model T33150/T33151 (Mfd.
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. BUY PARTS ONLINE AT GRIZZLY.COM! -36- Model T33150/T33151 (Mfd.
WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.