Page 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
ID label (see below). This information is required for us to provide proper tech support, and it helps us determine if updated documenta- tion is available for your machine. Manufacture Date Serial Number Model G0572 (Mfd. Since 01/21)
Failure to do so could result in serious per- risk of operator injury. If normal safety pre- sonal injury, damage to equipment, or poor cautions are overlooked or ignored, serious work results. personal injury may occur. Model G0572 (Mfd. Since 01/21)
LO, MID, or HI speed. C. OFF Button: Turns machine OFF. D. ON/SPEED Button: Turns machine ON. If machine is ON, cycles between fan speeds. E. Fuse Holder: Unscrews for quick removal and replacement of fuse. Model G0572 (Mfd. Since 01/21)
MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0572 HANGING AIR FILTER W/ REMOTE Product Dimensions: Weight................................55 lbs. Width (side-to-side) x Depth (front-to-back) x Height..............19-1/2 x 26 x 15 in.
Page 8
The information contained herein is deemed accurate as of 11/1/2020 and represents our most recent product specifications. Model G0572 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model G0572 (Mfd. Since 01/21)
Never operate under the influence of drugs or injury or blindness from flying particles. Everyday alcohol, when tired, or when distracted. eyeglasses are NOT approved safety glasses. Model G0572 (Mfd. Since 01/21)
Page 10
Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. Model G0572 (Mfd. Since 01/21)
Page 13
Two-prong outlets do not meet the grounding requirements for this machine. Do not modify or use an adapter on the plug provided—if it will not fit the outlet, have a qualified electrician install the proper outlet with a verified ground. -11- Model G0572 (Mfd. Since 01/21)
IMPORTANT: Save all packaging materials until you are completely satisfied with the machine and have resolved any issues between Grizzly or the shipping agent. You MUST have the original pack- aging to file a freight claim. It is also extremely helpful if you need to return your machine later.
Box 1 (Figures 4 & 5) A. Model G0572 Hanging Air Filter ....1 B. Secondary Filter (1-Micron, Bag-Type) ..1 C. Primary Filter (5-Micron, Pleated-Type) ..1 D.
Hardware Recognition Chart USE THIS CHART TO MATCH UP HARDWARE DURING THE INVENTORY AND ASSEMBLY PROCESS. Flat Head Screw -14- Model G0572 (Mfd. Since 01/21)
Using remote control, press ON button to turn machine ON. Press TIMER button and verify auto shut-off cycles through all options (1H, 2H, and 4H). Press OFF button to turn machine OFF. Congratulations! The test run is complete. -15- Model G0572 (Mfd. Since 01/21)
Eye Bolt Rubber Foot by mounting eye bolts and flush mount flange brackets on its top. Flush Mount Flange Bracket Figure 10. Air filter unit mounting hardware. -17- Model G0572 (Mfd. Since 01/21)
Page 20
" front-to-rear and air filter hangs 7' to the Flush Mount procedure on Page 19, and above floor when finished. install the air filter unit to the tabletop with the flush mount flange brackets. -18- Model G0572 (Mfd. Since 01/21)
Page 21
Get lifting help or use power lifting equip- ment such as a forklift to move heavy items. With help of an assistant, raise and secure (4) eye bolts to hanging lines. -19- Model G0572 (Mfd. Since 01/21)
Page 22
With help of an assistant, position air filter on wall or ceiling, then screw or bolt air filter in place. Figure 15. Lower-lip mounting holes. -20- Model G0572 (Mfd. Since 01/21)
Operation Overview Filtering Performance When the Model G0572 is turned ON, the fan motor starts on HI and then switches to the speed When used in conjunction with an efficient dust of your selection. Air is drawn through the pri-...
1000 and 2000 CFM. Overall size is ⁄ "L x 25 ⁄ "W x 29 ⁄ "H. H9622 Figure 17. Replacement filters for Model G0572. Figure 19. Model G0573 Floor Air Filter. www.grizzly.com 1-800-523-4777 order online at or call -22- Model G0572 (Mfd. Since 01/21)
• Loose mounting bolts. putting air filter back into operation. • Dirty or clogged filters. • Worn or damaged wires. • Any other unsafe condition. -23- Model G0572 (Mfd. Since 01/21)
Page 26
Figure 20. 5-Micron primary filter. Place primary filter in garbage bag and shake gently to remove dust. Visually inspect filter to see if it needs to be replaced. -24- Model G0572 (Mfd. Since 01/21)
Replace impeller if damage is vibration found. coming from air filter. Air filter does 1. Filters at fault. 1. Clean/replace filters (Page 23). not adequately collect dust; poor performance. -25- Model G0572 (Mfd. Since 01/21)
(see Figure 23). 250V fuse (F5A250V). The correct fuse is avail- Insert the batteries in the proper direction and able from Grizzly as Part Number P0572048. replace the cover. Tool Needed Phillips Screwdriver #2 ........1...
Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -27- Model G0572 (Mfd. Since 01/21)
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. Main 52V3 19V2 30V2 42V4 BUY PARTS ONLINE AT GRIZZLY.COM!
Page 32
P0572024 PRIMARY 5-MICRON OUTER FILTER P0572055 STEEL MESHING P0572025 HANDLE P0572056 HEX WRENCH 4MM P0572026 RUBBER FOOT P0572057 HEX WRENCH 5MM BUY PARTS ONLINE AT GRIZZLY.COM! -30- Model G0572 (Mfd. Since 01/21) Scan QR code to visit our Parts Store.
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. BUY PARTS ONLINE AT GRIZZLY.COM! -31- Model G0572 (Mfd.
WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.