Explaining Signal Words And Safety Alert Symbol - Bosch REXROTH IndraLogic VEP 5 Series Operating Instructions Manual

Bosch Rexroth AG
Use of the safety instructions
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Structure of the safety instructions

3.2 Explaining signal words and safety alert symbol

The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is used to draw attention to the safety instruction and also pro-
vides information on the severity of the hazard.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words danger,warning and caution is used to alert the reader to per-
sonal injury hazards.
DANGER
In the event of non-compliance with this safety instruction, death or serious in-
jury will occur.
WARNING
In the event of non-compliance with this safety instruction, death or serious in-
jury will occur.
CAUTION
In the event of non-compliance with this safety instruction, minor or moderate
injury can occur.
4/41
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
Embedded Terminals with Profibus DP
Consequences and
source of danger
DOK-CONTRL -VEP*XX.5***-IT01-EN-P
Master