Mounting The Camera - D-Link DCS-960L User Manual

Section 2 - Installation
To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you configure the camera
before mounting.
Turn the base plate on the bottom of the camera counterclockwise with a coin to remove it.
Place the base plate where you want to position the camera and use a pencil to mark the holes.
Make sure the holes are lined up horizontally.
Depending on the material of the wall or ceiling, use proper tools to drill two holes 25mm
deep with a 6mm drill bit where you marked. If the wall is made out of concrete, drill the holes
first, then insert the plastic anchors to support the screws.
D-Link DCS-960L User Manual

Mounting the Camera

1
2
3
16