Mounting The Camera On The Ceiling; Adjusting The Camera's Lens - D-Link DCS-6511 User Manual

Section 2: Installation

Mounting the Camera on the Ceiling

Drill hole
Locate a suitable position on the ceiling that is capable of supporting the weight of the
camera. Attach the alignment sticker to the ceiling or wall.
Wire hole
Drill hole Drill hole
Ceiling
Align the mounting plate to the drilled holes in the ceiling surface then tighten the screws.
Align the camera to the mounting plate and screw the camera body to the plate tightly.

Adjusting the Camera's Lens

Adjust the Camera's Lens gimbal; Turn the lens module left and right, up and down and the orientation until the desired position is
achieved. Tighten the pan, tile and the adjustment screw once completed.
D-Link DCS-6511 User Manual 13