Network - D-Link DCS-960L User Manual

Section 3 - Configuration
This section allows you to configure your network settings.
DHCP Select this connection if you have a DHCP server running on your network and
Connection: would like a dynamic IP address to be updated to your camera automatically.
Static IP Address: You may obtain a static or fixed IP address and other network information from
your network administrator for your camera.
IP Address: Enter the IP address that the camera will use on your network. You
may need to get this information from your ISP or network administrator.
Subnet Mask: Enter the subnet mask that your camera will use on the network.
The default value is "255.255.255.0. " This is used to determine if the destination
is part of the same subnet.
Default Gateway: Enter the gateway your camera will use on the network. The
gateway is used to forward frames to destinations in a different subnet. Invalid
gateway settings may cause transmissions to a different subnet to fail.
Primary DNS: Enter the primary domain name server that translates names to
IP addresses.
Secondary DNS: Enter the secondary domain name server used to back up the
Primary DNS.
PPPoE Settings:
If you are using a PPPoE connection, enable it and enter the User ID(username)
and Password for your PPPoE account. You can get this information from your
Internet service provider (ISP).
D-Link DCS-960L User Manual

Network

26