Mounting The Camera - D-Link DCS-8330LH User Manual

Section 2 - Installation
1
Locate the two mounting holes on the bottom, noting that they are
/
33 mm apart.
2
Use a pencil to make two marks 33 mm apart. Use a 6 mm drill bit
/
to drill two 3 mm deep holes over the pencil marks. Hammer in the
plastic wall anchors to support the screws.
3
Twist the screws into the anchors, leaving the tops of the screws
/
exposed from the surface. Do not over tighten the screws.
D-Link DCS-8330LH User Manual

Mounting the Camera

33 mm
33 mm
33 mm
33 mm
33 mm
33 mm
2.6~3.0mm
2.6~3.0mm
2.6~3.0mm
8