Children should be supervised to ensure that they do not play with the appliance. SPECIFICATIONS Model: DVC865L DVC155L Standard filter type Cloth filter (for dry and wet dust) Maximum air volume (with BL1850B, Φ32 mm x 1.7 m hose) 2.1 m /min Vacuum (with BL1850B, Φ32 mm x 1.7 m hose)
Model DVC865L Sound pressure level (L ) : 70 dB(A) or less warnings Uncertainty (K) : 2.5 dB(A) Model DVC155L WARNING: IMPORTANT! READ CAREFULLY Sound pressure level (L ) : 70 dB(A) or less all safety warnings and all instructions BEFORE Uncertainty (K) : 2.5 dB(A)
Page 4
17. MAINTAIN THE CLEANER WITH CARE. Keep 35. When carrying out service or repair opera- the cleaner clean for better and safer per- tions, all contaminated items which cannot be formance. Follow instructions for changing satisfactorily cleaned are to be disposed of; accessories.
Hold the cleaner and the battery causing fires, personal injury and damage. It will cartridge firmly when installing or removing bat- also void the Makita warranty for the Makita tool and tery cartridge. Failure to hold the cleaner and the charger.
Page 6
To install the battery cartridge, release the lock first, and Indicating the remaining battery capacity then open the battery cover. After that, insert the battery cartridge. Only for battery cartridges with the indicator ► 1. Lock 2. Battery cover ► 1. Indicator lamps 2. Check button Align the tongue on the battery cartridge with the groove Press the check button on the battery cartridge to indi- in the housing and slip it into place.
Page 7
Overdischarge protection When the battery capacity becomes low, the tool stops automatically. If the product does not operate even when the switches are operated, remove the batteries from the tool and charge the batteries. Switch action Press the check button to indicate the remaining battery capacities.
Page 8
Locking or unlocking the caster Installing the powder filter (HEPA) and prefilter (for dry dust) Optional accessory CAUTION: Never pick up water or other liq- uids or wet dusts when using the powder filter. Picking up such things may cause the powder filter breakage.
Remove the rubber holder. Installing the water filter Optional accessory NOTICE: Never pick up water or wet dust without the float and the cloth filter or the water filter. NOTICE: For picking up wet dust, make sure that the float cage and the float are installed on the cleaner.
Installing the polyethylene bag Emptying the polyethylene bag Cleaner can also be used without polyethylene bag. WARNING: Always make sure that the cleaner However, using polyethylene bag is easier to empty the is switched off and the battery cartridge is removed tank without letting your hands dirty.
The tool box is convenient for carrying batteries, pipe, Connecting the attachment with or cuffs. lock function Optional accessory Insert the attachment into the suction inlet until it clicks. To remove, pull the attachment while pushing the release button. Connecting the hose NOTICE: Never force the hose for bending or stamp it.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Storage of accessories The pipes can be placed into the pipe holder when not using the cleaner for a short time.
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool spec- ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.