Casio IT-9000C User Manual page 68

1 Terminal Detect
Switch
2 Mount Hooks
3 Removal Buttons
4 Power Supply/Data
Communication
Terminals
5 Power Indicator
LED
6 Power Switch
7 USB Client Port
8 USB Host Port
9 LAN Port
10 LAN Connection
Status LED
11 LAN
Communication
Status LED
12 Selector Switch
13 AC Adaptor Jack
E-66
This switch detects when the IT-9000 is mounted correctly on the
Ethernet Cradle.
These hooks are used to stabilize the IT-9000 when mounting it
on the cradle.
Press when removing the IT-9000.
Power is supplied to the IT-9000 via these contacts. Also used for
data communication.
This LED indicates the power status and the mounting status of
the IT-9000.
Red: Power on, IT-9000 is not installed.
Green: Power on, IT-9000 mounted correctly.
Turns the power on and off.
This port is used to transmit system data and le data (download,
upload) by connecting the Ethernet Cradle to a PC using a USB
cable (DT-380USB-A). The dedicated driver must be installed in
the PC before connecting the Ethernet Cradle to the PC.
This port is used to connect a corresponding USB peripheral
device.
This port is used for connecting the cradle to a PC or hub via a
LAN cable so that system data and le data can be transmitted
(uploaded or downloaded).
The special driver software must be installed in the IT-9000.
This LED shows the status of the LAN connection.
Off: LAN cable not connected correctly.
Lit orange: LAN cable connected correctly.
This LED shows the LAN operation status.
Off: No communication.
Blinking: Communication in progress.
This switch is used to switch between a USB connection and a
LAN connection.
LAN: LAN
A: USB host
B: USB client
Connect the AC adaptor (sold separately) here.