Casio IT-9000C User Manual page 10

Power Supply / AC Adaptor
Do not use the Handheld Printer Terminal at a voltage other than the speci ed voltage.
Also, do not connect the Handheld Printer Terminal to a multi-plug power strip.
Never modify, sharply bend, twist, or pull on the power cord.
Never use a detergent to clean AC adaptor and its power cable, especially on the
plug and the jack.
Do not use an AC adaptor with a bent connector.
Do not twist or wrench the connector.
When using the battery chargers and the cradles, be sure to use the respective
AC adaptor.
Never pull on the power cord when unplugging it. Always hold the plug when
unplugging it from the wall outlet.
Never touch the plug while your hands are wet.
Be sure to unplug the power cord from the wall outlet before cleaning the
battery chargers and the cradles.
Unplug the power cord from the wall outlet whenever leaving the battery
chargers and the cradles unattended for a long period.
The housing of the AC adaptor can become warm during normal use.
At least once a year, unplug the AC adaptor from the wall outlet and clean any
dust that builds up between the prongs of the plug.
Dust built up between the prongs can lead to the danger of re.
Check that the connector is properly oriented and then push it straight in (do not
insert upside down).
Do not allow uids or foreign objects to get into the AC adaptor.
Choose a location where the power cord is readily accessible and can be easily
plugged in and unplugged.
When using the AC adaptor, always use a power outlet with the speci ed power supply
and voltage, and ensure that the power plug is inserted into the socket fully and securely.
Backup of All Important Data
Note that CASIO Computer Co., Ltd. shall not be held liable to you or any third
party for any damages or loss caused by deletion or corruption of data due to
use of the Handheld Printer Terminal, malfunction or repair of the Handheld
Printer Terminal or its peripherals, or due to the batteries going dead.
The Handheld Printer Terminal employs electronic memory to store data, which
means that memory contents can be corrupted or deleted if power is interrupted
due to the batteries going dead or incorrect battery replacement procedures.
Data cannot be recovered once it is lost or corrupted. Be sure to make backup
of all important data. One way to do this is to use the separately sold cradles to
transfer data to a computer.
E-8
Warning
Caution
Caution