Recharge The Battery From A Wall Socket - NETGEAR MR1100EE User Manual

Nighthawk LTE Mobile Hotspot Router Model MR1100

Recharge the Battery From a Wall Socket

To recharge the battery from a wall socket:
1. Attach one end of the micro USB cable to the connector on the right on the mobile router and attach
the other end to the wall charger (included).
2. Plug the wall charger into a wall socket.
The Battery bar on the LCD indicates that the battery is charging.
Note The battery continues to charge when the mobile router is powered off.
If your battery does not charge, check the following:
• Is the mobile router hot? If you are in a low-coverage area, are transferring a lot of data, or left the
mobile router in a hot location, the internal temperature of the mobile router can rise above 45°C.
In these conditions, the battery cannot be charged due to safety limits with lithium-ion battery
technology.
• Make sure that the USB cable and the AC wall charger are connected securely and are working
correctly.
• If the wall socket is controlled by a switch, make sure that the switch is in the power-on position.
Manage Battery Usage and Charging
22