Connect To The Mobile Router Network; Wifi Connection - NETGEAR MR1100EE User Manual

Connect to the Mobile Router Network

You can connect your computers and mobile devices to the mobile router WiFi network.You can also connect
a computer to the mobile router through a tethered connection using the USB cable that came in the package
with the mobile router.
Note If you set up your computer to use a static IP address, change the settings so that it uses
Dynamic Host Configuration Protocol (DHCP).

WiFi Connection

You can find and select the WiFi network or you can connect to the router's WiFi network with Wi-Fi Protected
Setup (WPS). For information about using WPS, see
on page 51.
To find and connect to the WiFi network:
1. Make sure that the mobile router is powered on (its LED is lit).
2. Check to make sure that WiFi is enabled on your computer or mobile device and search for WiFi networks.
See the following table or the manual for your WiFi-enabled device for further details on searching for
WiFi networks.
Device
Windows
computer
Mac computer
Mobile devices
3. Select the WiFi name that is displayed on your mobile router screen.
4. Enter the WiFi password exactly as shown on the mobile router screen.
The password is case-sensitive.
Your computer or mobile device connects to the WiFi network.
Nighthawk LTE Mobile Hotspot Router Model MR1100
Instructions
Click the Internet Access icon, which is usually found on the bottom right
side of your screen.
Go to the WiFi menu and select Network.
Go to the Settings menu and tap the WiFi icon.
Connect to the Mobile Router
Use WPS to Connect to the Mobile Router WiFi Network
16