Add-On Orbi Pro Wifi 6 Mini Satellite Leds; Wall Mount Your Orbi Pro Wifi 6 Mini - NETGEAR SXK30 User Manual

Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30

Add-on Orbi Pro WiFi 6 Mini satellite LEDs

The following table describes the LED behavior for an add-on Orbi Pro WiFi 6 Mini
satellite (model SXS30) that was purchased separately from the Orbi Pro WiFi 6 Mini
System kit.
Table 2. Orbi Pro WiFi 6 Mini add-on satellite (model SXS30) LED description
LED LED Behavior
Power LED The Power LED is located adjacent to the power port on the rear panel.
• Solid green: Power is on.
• Solid amber: The satellite is rebooting.
• Blinking amber: The satellite is resetting to factory default settings.
• Blinking red: The firmware is corrupted.
• Off: Power is not supplied.
Add-on satellite Optional add-on satellites are sold separately and can be added to your Orbi network. The
bar LED bar LED is located on the front.
• Pulsing white: The satellite is booting.
• Solid white: The satellite is ready to sync to the router (press the Sync button).
• Blue for three minutes: The connection between the satellite and the router is good.
• Amber for three minutes: The connection between the satellite and the router is fair.
• Magenta: The satellite is not connected to the router or is not getting an IP address.
• Off: The satellite synced to the router and is working normally.

Wall mount your Orbi Pro WiFi 6 Mini

Your package contains wall-mounting items:
• Wall-mount bracket
• Wall anchors
• Screws
Attach the mount bracket to the wall, and then attach the mount base to your router or
satellite.
Overview 13 User Manual