Labels & Cosmetics - Grizzly G0889 Owner's Manual

302
Specifications
Motor: 2 HP, 120V, 60 Hz, 15A
Cutterhead: 1-13/16" Dia., 3-Knife
Knife Size: 13" x 1/2" x 1/16"
Max. Depth of Cut Per Pass: 1/8"
Cutterhead Speed: 9000 RPM
Max. Cutting Height: 6"
Max. Cutting Width: 13"
Min. Stock Thickness: 1/8"
Min. Stock Length: 8"
Feed Rate: 26 FPM
5012917
Weight: 66 lbs.
G0889
310
G0889Z
309
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
REF PART # DESCRIPTION
301 P0889301 DISCONNECT ELECTRICITY LABEL
302 P0889302 MACHINE ID LABEL (G0889)
302 P0889Z302 MACHINE ID LABEL (G0889Z)
303 P0889303 EYE/EAR/LUNG WARNING LABEL
304 P0889304 UP/DOWN ROTATION LABEL
305 P0889305 READ MANUAL LABEL
306 P0889306 TOUCH-UP PAINT, GRIZZLY GREEN
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
Model G0889/G0889Z (Mfd. Since 12/18)
Labels & Cosmetics
MODEL G0889
13" BENCHTOP PLANER
WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved safety glasses, respirator, hearing protection.
3. Disconnect power before doing any service on machine.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or items that can get
entangled. Tie back long hair and roll up sleeves.
6. Ensure machine is correctly set up before starting.
7. Do not plane more than one workpiece at a time.
8. Never plane material smaller than 8" long, 3/4" wide, or 1/8" thick.
9. Do not allow hands or clothing to get pulled into cutting area while
feeding workpiece.
10. Stand clear of board ends during cutting operation.
11. Do not plane boards with cracks, loose knots, or other defects.
12. Knives are sharp! Use extreme caution when changing/adjusting.
13. Never reach into cutting area during machine operation.
14. Prevent unauthorized use by children or untrained users.
301
307
302
Specifications
Motor: 2 HP, 120V, 60 Hz, 15A
Cutterhead: 4 Spirals, 36 Inserts
Insert Size: 15 x 15 x 2.5mm
Max. Depth of Cut Per Pass: 1/8"
Cutterhead Speed: 9000 RPM
Max. Cutting Height: 6"
Max. Cutting Width: 13"
Min. Stock Thickness: 1/8"
Min. Stock Length: 8"
Feed Rate: 26 FPM
5012917
Weight: 66 lbs.
303
WARNING!
INJURY HAZARD!
To reduce risk of short-
and long-term injury,
wear safety glasses,
hearing protection, and
a respirator when using
this machine.
REF PART # DESCRIPTION
307 P0889307 ELECTRICITY LABEL
308 P0889308 GRIZZLY.COM LABEL
309 P0889309 INJURY HAZARD LABEL
310 P0889310 MODEL NUMBER LABEL (G0889)
310 P0889Z310 MODEL NUMBER LABEL (G0889Z)
311 P0889311 GRIZZLY LOGO LABEL RED
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
MODEL G0889Z
13" BENCHTOP PLANER
w/SPIRAL CUTTERHEAD
WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved safety glasses, respirator, hearing protection.
3. Disconnect power before doing any service on machine.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or items that can get
entangled. Tie back long hair and roll up sleeves.
6. Ensure machine is correctly set up before starting.
7. Do not plane more than one workpiece at a time.
8. Never plane material smaller than 8" long, 3/4" wide, or 1/8" thick.
9. Do not allow hands or clothing to get pulled into cutting area while
feeding workpiece.
10. Stand clear of board ends during cutting operation.
11. Do not plane boards with cracks, loose knots, or other defects.
12. Knives are sharp! Use extreme caution when changing/adjusting.
13. Never reach into cutting area during machine operation.
14. Prevent unauthorized use by children or untrained users.
304
306
305
311
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
308
-49-