Maintenance; After Use - Makita CL102D Quick Start Manual

Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks, furniture, etc.
Nozzle slips on easily.
1
011521
Nozzle + Extension wand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for
cleaning a floor while standing erect.
1
3
011522
Corner nozzle
Fit on the corner nozzle for cleaning corners and crevices
of a car or furniture.
2
011523
Corner nozzle +Extension wand (Straight pipe)
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.
3
011524
1. Nozzle
1. Cleaner
2. Nozzle
3. Extension wand
2
1. Cleaner
2. Corner nozzle
1
1. Cleaner
2. Extension wand
3. Corner nozzle
1
2

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off before
•
attempting to perform inspection or maintenance.

After use

011532
When storing the cleaner, hang it from a nail using the
hand strap.
NOTE:
Putting the cleaner against the wall without any
•
other support cause the cleaner to fall down and be
damaged.
011567
Cleaning
011533
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
8