Makita CL106FDZW Instruction Manual
Cordless cleaner
Hide thumbs
Also See for CL106FDZW:
- Instruction manual (48 pages) ,
- Instruction manual (65 pages) ,
- Instruction manual (65 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita CL106FDZW
Summary of Contents for Makita CL106FDZW
- Page 1 INSTRUCTION MANUAL Cordless Cleaner CL106FD Read before use.
-
Page 2: Specifications
WARNING This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capa- bilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. - Page 3 — Powder to clot such as cement or toner CAUTION: Only use genuine Makita batteries. Conductive dust such as metal or carbon Use of non-genuine Makita batteries, or batteries that — have been altered, may result in the battery bursting —...
-
Page 4: Functional Description
FUNCTIONAL CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, DESCRIPTION it may accidentally fall out of the tool, causing injury to you or someone around you. CAUTION: Do not install the battery cartridge CAUTION: Always be sure that the tool is forcibly. If the cartridge does not slide in easily, it is switched off and the battery cartridge is removed not being inserted correctly. - Page 5 Switch action Disposing of dust CAUTION: CAUTION: Before installing the battery car- Empty the cleaner before it tridge into the tool, always check to see that the becomes too full, or the suction force weakens. switch trigger actuates properly and returns to CAUTION: Be sure to empty the inside of the the "OFF"...
- Page 6 Reassembly Put on the filter fully in position on the cleaner unit. ► 1 . Prefilter 2. Capsule Twist the prefilter in direction of the arrow to unfasten the securing lip from the cleaner unit and then pull off ► 1 . Filter the prefilter. NOTICE: Make sure the filter is put on straight without being peeled back. If the filter is put on incorrectly as illustrated, dust will get into the motor housing, and cause a motor failure.
- Page 7 ► 1 . Filter Install the capsule. Align the mark on the capsule with the mark near the handle and then firmly twist the cap- Example 3: The filter has been loaded in a peeled back sule in direction of the arrow until it is secured. state ► 1 . Capsule 2. Handle 3. Mark ► 1 . Filter Example 4: The securing lip on the prefilter is not firmly NOTE: Always remove dust ahead of time, as the locked in the groove of cleaner housing suction power will be reduced if there is too much dust in the cleaner.
-
Page 8: Operation
Nozzle + Extension wand (Straight OPERATION pipe) The extension wand fits in between the nozzle and the CAUTION: To connect attachments, such cleaner itself. This arrangement is convenient for clean- as nozzle, twist and insert the attachment in ing a floor in a standing position. direction of the arrow to secure the connection during use. To disconnect the attachments, twist and extract it also in direction of the arrow. -
Page 9: Maintenance
Cleaning without nozzle Cleaning You can pick up powder and dust without nozzle. From time to time wipe off the outside (cleaner body) of the cleaner using a cloth dampened in soapy water. Clean out also the suction opening, dust bag/paper filter mounting area and the dust stopper. MAINTENANCE Wash the filter in soapy water when it is clogged with dust and the cleaner power becomes weak. -
Page 10: Troubleshooting
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885525A926 www.makita.com 20160707...