Hitachi IJ RX2-SD160 Instruction Manual page 29

2
Loosen the screw and remove the print head cover.
Around nozzle
Loosen the screw.
Pull out.
Print head cover
Clean the inside of the cleaning section with makeup.
3
Clean the orifice plate, charge electrode, deflection electrode, gutter, and mounting base with makeup.
(Also see "1.3 Print head cleaning".)
Charge electrode
Cleaning bottle
Deflection electrode
Gutter
Orifice plate
Mounting base
Area to be cleaned
Beaker
* Thoroughly wipe off the makeup on the surface of each part (including the mounting base) and dry each part
thoroughly with wiping paper.
●Start operation 3-6