Hitachi IJ RX2-SD160 Instruction Manual page 191

Detailed explanation of Classification No.2 (Table 2)
●The conditions of Print data are described in Table 3, which can be used when a part of setting is corrected.
Table 3. Conditions with which display color of Message name changes to Brown on "Select message" screen
No. Item
1 DIN print
2 Ink Drop Charge Rule
3 Product speed matching
4 Print format
5 Line spacing
Ink drop use
6
(High-speed print)
[NOTE]
●After executing Select message, correct and confirm the Print data. And then please overwrite and use it for
printing. (Display color of Message name on "Select message" screen changes from Brown to Black.)
Detailed explanation of Classification No.3 (Table 2)
●The conditions of Print data which can NOT be used are described in Table 4 below.
Table 4. Conditions with which display color of Message name changes to Red on "Select message" screen
No. Item
1 Number of Print lines
2 Max Character size
3 Min Character size
4 Printing columns
5 Calendar items
6 Replacement items
7 Count items
Bar code/
8
2D code print
Shift code
9
Time count
10 User pattern
"DIN print" is NOT available on the lower model. "DIN print" of Print
data shall be set to [Disable] instead of [Enable]
The lower model is a Basic machine. "Ink Drop Charge Rule" of Print
data shall be set to [Standard (single scan/interlaced)] instead of [Mixed
single scan and interlaced] or [Dot mixed interlaced].
The lower model is a Basic machine. "Product speed matching" of Print
data shall be set to [None] instead of [Auto]
The lower model is a Basic machine. "Format Setup" of Print data shall be
set to [Individual setup] instead of [Free layout].
The lower model has NO setting for "Line spacing expansion".
[Line spacing] of Print data shall be set to "2" instead of "3 or greater".
There are some Ink drop use rates which are NOT available on the lower
model. "Ink drop use" of Print data shall be set to the configurable value.
Set to [HM] for "High-speed print".
Max Line of the lower model < Line of Print data
Max Character size of the lower model < Character size of Print data
Min Character size of the lower model > Character size of Print data
Max Printing columns of the lower model < Printing columns of Print data
Max Calendar items of the lower model < Calendar items of Print data
Max Replacement items of the lower model < Number of Substitution rules
of Print data
Max Count items of the lower model < Count items of Print data
Bar code is set, which CANNOT be set on the lower model.
2D code print is set, which CANNOT be set on the lower model.
Shift code is set, which CANNOT be set on the lower model.
Time count is set, which CANNOT be set on the lower model.
The lower model is a Basic machine, and the settings of 51st onward of
User patterns (Fixed) are made.
The lower model is a Basic machine and the settings of User patterns (Free)
are made.
Conditions and corrections
Conditions
●Backing up data to USB memory 7-35