Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita DHP480RMJ Instruction Manual

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Battery capacity
6. Switch trigger
7. Lamp

SPECIFICATIONS

Model
Capacities
-1
No load speed (min )
Blows per minute
Overall length
Net weight
Battery cartridge
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HAMMER DRIVER
DRILL SAFETY WARNINGS
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
4
Explanation of general view
8. Reversing switch lever
9. Speed change lever
10. Action mode changing ring
11. Adjusting ring
12. Graduation
13. Arrow
14. Sleeve
Concrete
Steel
Wood
Wood screw 10 mm x 90 mm
Machine screw
High (2)
Low (1)
High (2)
Low (1)
BL1430/BL1440
ENE039-1
GEA010-1
GEB056-5
DHP470
13 mm
13 mm
38 mm
M6
0 - 1,550
0 - 400
0 - 23,000
0 - 6,000
199 mm
1.7 kg
BL1815/BL1815N
D.C. 14.4 V
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
4. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6. Hold the tool firmly.
7. Keep hands away from rotating parts.
8. Do not leave the tool running. Operate the tool
only when hand-held.
9. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
10. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
15. Groove
16. Hook
17. Screw
18. Bit holder
19. Bit
20. Blow-out bulb
DHP480
13 mm
13 mm
38 mm
10 mm x 90 mm
M6
0 - 1,550
0 - 400
0 - 23,000
0 - 6,000
199 mm
1.5 kg
BL1830/BL1840
D.C. 18 V
1.8 kg