Makita DHW080ZK Instruction Manual page 12

4. Remove the water hose connector from the inlet
of the high pressure washer. After that, connect the filter
case to the inlet and then hose to the filter case.
1
2
4
► 1. Inlet of the high pressure washer 2. Filter case
3. Water hose connector 4. Hose
5. Put the high pressure washer onto the container so
that it is secured with the mounts on the lid of the container.
1
3
► 1. High pressure washer 2. Lid 3. Air bleeding hole
NOTICE:
container when carrying. Carrying the container
with high pressure washer and accessories or water
inside may cause accident or personal injury due to
its own weight.
NOTICE:
shake, turnover, or lean it excessively. Doing so
may cause;
— the water inside spilled out;
— the high pressure washer on the lid dropped off
from the container or;
— the rotation of the container's wheels hindered.
NOTICE:
handle, water may spill out if there is plenty of
water inside.
3
NOTICE:
bleeding hole if the water inside reaches to the air
bleeding hole by tilting the container.
NOTICE:
may be broken.
NOTICE:
water for a long time. Doing so may cause the con-
tainer damaged and result in water leakage.
After use, follow the procedure below:
1.
Remove the cap on the drain outlet and discharge
water.
► 1. Drain outlet
2. Wipe off the moisture inside of the container using
a cloth and then dry the container completely.
NOTICE:
and the accessories while the inside of the con-
tainer is wet. Remaining moisture may cause mal-
function and rust.
2
12 ENGLISH
Pay attention to the handling of the
When carrying the container, do not
When carrying the container by the
Water may come out from the air
Do not step on the container. The lid
Do not leave the container filled with
Do not store the high pressure washer
1