Table of Contents
Advertisement
Using Function control, you can check at a glance and change the current settings of the following items:
SUBTITLE, ANGLE, AUDIO, ADVANCED SURROUND and DIGITAL GAMMA.
Function control also allows you three ways of direct skips (title [track],chapter and time).
• While the disc is playing, press FUNCTION CONTROL to display the screen shown below.
• Pressing ' or " changes the currently selected item.
• Numbers in
1
2
3
4
5
6
7
8
1
1
1
1
1
Direct title skip
• The number of the title currently played back is
displayed.
• You can skip directly to the desired title.
2
2
2
2
2
Direct chapter skip
• The number of the chapter currently played back is
displayed.
• You can skip directly to the desired chapter.
3
3
3
3
3
Direct time skip
• Elapsed time from the beginning of the disc is displayed.
• You can skip directly to the point from which you want
to start playback.
4
4
4
4
4
Subtitle setting
• The subtitle number and language currently selected
are displayed. (When a disc with only one subtitle is
played back, xx is displayed.)
• You can select the desired subtitle language.
5
5
5
5
5
Angle setting
• The current angle is displayed. (When a disc with
only one angle is played back, xx is displayed.)
• You can select the desired angle.
• In Function Control mode, you can return to the previous setting screen by pressing RETURN or
FUNCTION CONTROL.
• You can cancel the Function Control mode by pressing ËSTOP, DVD MENU, or TITLE.
• The setting screen is cleared automatically whenever you display a DVD screen that prompts you to change the
scene by pressing ', ", \, or |.
• When playing back Audio CDs only the Track Number and Time is displayed.
DVNC65SE081_087.pm6
Downloaded from:
http://www.usersmanualguide.com/
About the Function Control Screen
refer to the pages where the setting procedures are described.
Direct title skip
Direct chapter skip
Direct time skip
Subtitle
Angle
Audio
Advanced Surround
Digital Gamma
82
82
82
83
84
81
Currently selected item
2/5
8/30
01:30:08
2 ENGLISH
1
1
5.1ch
|||
ON
|||
ON
6
6
6
6
6
Audio setting
• The type of audio currently selected is displayed.
• You can select the desired type of audio.
7
7
7
7
7
Advanced Surround setting
• This function provides rich surround sound by
downmixing Dolby Digital 5.1 channel and Dolby
Surround (Pro Logic) to 2-channel audio or TV.
• You can toggle the setting between "ON" and "OFF",
and change the level.
• When "COMPRESSION" is "ON", this function is
disabled, which is indicated by xx. To use the
Advanced Surround function, set the
"COMPRESSION" to "OFF" (see page 45).
8
8
8
8
8
Digital Gamma setting
• You can make the entire image easier to see by
brightening the darker and obscure portions.
• You can toggle the setting between "ON" and "OFF",
and change the level.
DVD
DVD
|
DVD
BIT RATE indicates the
amount of data that is
being transferred to the
Unit per second.
However, note that
picture quality is not
always in proportion to
the bit rate.
85
86
87
8/10/02, 10:12 am
C D
C D
GB-81
Advertisement
Table of Contents
