Recording From Other Equipment; Recording From Other Equipment - Sharp DV-NC65S Instruction Manual

Recording From Other Equipment

Recording from Other Equipment

You can record video and audio signals from various external
sources, such as a camcorder, onto a video tape using this Unit.
For example, recording from a camcorder connected to LINE 2 IN/
DECODER on the Unit:
1
Connect your signal source (e.g.
Camcorder, Digital Camera etc.) to the
desired scart socket on the back of the
Unit using the manufacturers'
recommended cable (not supplied).
2
Ensure that the tape on which you wish to
record is inserted into the Unit.
3
Press the INPUT SELECT button on the
remote control until the VCR display
shows L2.
4
Press the RECORD button on the remote
to start recording.
OTHER POSSIBLE CONNECTIONS
• If you wish to record from a source connected to
LINE 1 IN/OUT, select L1. Press the Æ Æ Æ Æ Æ REC button
on the remote to start recording.
• If you wish to record from a source connected with
audio phone leads to the sockets on the front of the
Unit, select L3. Press the Æ Æ Æ Æ Æ REC button on the
remote to start recording.
• There are many different ways of connecting external equipment to the Unit. Please refer to your equipment operation
manuals for further information.
GB-70
DVNC65SE063_070.pm6
Downloaded from: http://www.usersmanualguide.com/
LINE 2
LINE 1 (TV)
L
R
DVD/VCR Unit back panel
70
TIMER
OPERATE
ON/OFF
ON
DISPLAY
SCREEN
FUNCTION PROG/
CONTROL REPEAT
TITLE
S-VIDEO
RGB VIDEO
CLEAR
RETURN
OUTPUT
SELECTOR
S-VIDEO
AM/PM
/
REV
REC
TAPE
SPEED
CH
VCR/DVD COMBINATION
RRMCGA055WJSA
LINE 1 (TV)
LINE IN 3 VIDEO L - AUDIO - R
8/10/02, 9:11 am
SHOWVIEW
EJECT
VCR/DVD VCR MENU
SELECTOR DVD SETUP
OPEN/
ANGLE
CLOSE
DVD MENU
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
INPUT SELECT VCR DVD
FWD
PLAY
PAUSE/STILL
STOP
DPSS
SKIP SLOW
AUDIO
OUTPUT
VCR DVD