Basic Connection; Connecting To Antenna In/Antenna Out - Sharp DV-NC65S Instruction Manual

Caution:
• Be sure to turn off the Unit and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO lead (commerially available).
• Be sure to keep the Unit connection leads separate from the TV aerial lead when you install the Unit,
because it may cause electrical interference when you are watching television programmes.

Connecting to ANTENNA IN/ANTENNA OUT

The connection method differs depending on the type of TV.
The signal from ANTENNA OUT will only be the Television Signal. A scart lead MUST be used to view the units'
playback signal.
DVNC65SE019_024.pm6
Downloaded from: http://www.usersmanualguide.com/
TV
To antenna
input jack
19

Basic Connection

To ANTENNA
IN jack
S-VIDEO
RGB VIDEO
LINE 2
DVD OUT
OUTPUT
SELECTOR
AUDIO
LINE 1 (TV)
S-VIDEO
R
AUDIO
L
To ANTENNA
OUT jack
Round coaxial cable
(RF connection cable)
(supplied)
7/10/02, 4:35 pm
Antenna
Aerial cable
VCR/DVD OUT ANTENNA
R
IN
AUDIO
L
OUT
VIDEO
GB-19