General Information - Bosch T40075A Original Instructions Manual

en | 7 | T40075A

1 General Information

Product name:
Product type:
Product number:
Weight:
Max. load capacity:
Static test coefficient:
Intended Use:
The engine support serves for holding the engine
and gearbox units of the 4 cylinder petrol engines
(1.2 l, 1.4 l and 1.6 l) and the 1.4 l natural gas engine
in accordance with the workshop manuals of the
Volkswagen Group brands.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Only for use by qualified personnel with gas
powered vehicles.
Use only for loads up to 285 kg.
Only use in connection with a suitable engine and
gearbox jack (e.g. VAS 6931/V.A.G. 1383A) (see
workshop manuals of the Volkswagen Group
brands).
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Only use on level, horizontal and weight-bearing
ground.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
2018-5-18
Engine support
Load holding device
T40075A
10.82 kg
285 kg
3.0
Figure 1: Engine support T40075A
1 Base plate
2 Bolt T40075/3
3 Hexagon screw M10 x 25, 8.8, nut ISO 4032-M10-8 and
washer (2 pieces)
4 Bolt T40075/2
5 Hexagon screw M12 x 35, 8.8 with spring ring (2 pieces)
6 Bolt T40075/6
7 Bolt T40075/5
8 Bolt T40075/4
9 Hexagon screw M10 x 35, 8.8 with washer
10 Bolt T40075/1
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany