Table of Contents
Advertisement
AT+CSAS
This command allows to save the settings of the following commands: AT+CSCA, AT+CSMP and
AT+CNMI.
For further information on AT+CSAS command, see the chapter "Functional Examples".
Command
AT+CSAS
AT+CRES
This command restores the setting of the following commands: AT+CSCA, AT+CSMP and
AT+CNMI.
Command
AT+CRES
AT+CNMI
This command displays a report when a new SMS arrives.
For further information on AT+CNMI command, see the chapter "Functional Examples".
Command
AT+CNMI=<mode>,<mt>
AT+CNMI?
Default: AT+CNMI=0,1
<mode> Display Mode
2
If the modem is Off-line, the message will be displayed on the DTE in <mt> format.
If the modem is On-line, the message will be displayed on the DTE in <mt> format at
the end of the connection.
0,1,3
Equal to 2
<mt>
Report format
0
No report
1
Report with format:
+CMTI: <mem>,<index>
2
Report with format:
+CMT:<oa>,[<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<lengh>]
<data>
Examples
1) AT+CNMI=2,1
Report: +CMTI: "SM",2
Description: The received SMS has been stored in the location 2 of the SIM memory.
2) AT+CNMI=2,2
Report: +CMT: "+393217654321",,"01/01/75,12:06:14+00"
First SMS message with GSM Bulk
Description: the received SMS is displayed directly on the DTE.
Save settings
Possible answers
OK
Restore settings
Possible answers
OK
Indication of New incoming message
Possible answers
OK / ERROR
+CNMI: <mode>,<mt>
Action
Save the current settings
Action
Restore the saved settings
Action
Select the report display mode
Shows the current settings
35
Advertisement
Table of Contents
