Digicom GSM Bulk User Manual page 30

AT+CPBR
This command is used to read a telephone number in the current phonebook and can be selected
with the command AT+CPBS.
Command
AT+CPBR=<idx1>,<idx2>
<idx1> , <idx2> Location range
AT+CPBR=1 Read entry 1
AT+CPBR=1,10 Read entries from 1 to 10
AT+CPBF
This command is used to find a telephone number inside the phonebook, knowing the associated
identifier (e.g. starting with D...).
Command
AT+CPBF=<"text">
AT+CPBP
This command is used to find an identifier associated with a telephone number inside the
phonebook, knowing the number itself.
Command
AT+CPBP=<"number">
30
Read a telephone number
Possible answers
+CPBR:
<idx1>,<number>,<type>,<text>
...
<idx2>,<number>,<type>,<text>
Search for a telephone number (knowing the stored text)
Possible answers
+CPBF:
<idx1>,<number>,<type>,<text>
...
<idx2>,<number>,<type>,<text>
Search for a telephone number (knowing the number)
Possible answers
+CPBP:
<idx1>,<number>,<type>,<text>
Action
Reads the numbers in the
phonebook, from <idx1> to
<idx2>
Action
Displays the telephone numbers
with the specified <"text">
identifier.
Action
Displays the identifier associated
with the specified <"number">