Preface - Digicom GSM Bulk User Manual

PREFACE

All rights reserved; no part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, otherwise, without the prior
written permission of Digicom S.p.A. The following installation rules should be respected in
order to have the best working order of the equipment and for the user's safety.
ENVIRONMENTAL CONDITIONS
Enviromental temperature
from -20 to +55° C
Rapid changes of temperature or humidity should be avoided.
This equipment, including cables, should be installed in an area free from:
• Dust, humidity, heat from direct sun light.
• Objects which irradiate heat. These could cause damage to the container or other
problems.
• Objects which produce a strong electtromagnetic field (loudspeakers, etc.)
• Liquids or chemical corrosive substances.
CLEANING THE TERMINAL
Use a clean and soft cloth. Wet the cloth with water or natural detergent if it is necessary
to remove any stains. Never use chemical products such as petrol or solvents.
VIBRATIONS OR DROPPING
Caution against vibrations and dropping.
In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
DECLARATION OF CONFORMITY
We, Digicom S.p.A. registered office at: via Volta 39 - 21010 Cardano al Campo (Varese -
Italy) declare under our sole responsability that the product:
Name: GSM Bulk Type: Modem Dual-Band EGSM 900/1800MHz
satisfies the basic requirement of the below indicated Directive:
• 1999/5/CE of March 9 1999, R&TTE
as having been designed in conformity with the requirements of following Reference
Standards:
EN 60950 EN 301 489-1
WARNING: This is a class A product.
EN 301 489-7
Relative humidity
from 20 to 80% n.c.
EN 301-419-1 EN 301-511
3