Processor; Removing The Processor - Dell OptiPlex 7000 Micro Service Manual

Steps
1. Align and insert the speaker into the slot and press it until the release tab clicks.
2. Route the speaker cable in the routing guides on the fan assembly.
3. Connect the speaker cable to the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Processor

Removing the processor

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the speaker .
4. Remove the fan assembly.
5. Remove the heat sink.
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
40 Removing and installing components
after working inside your
before working inside your
computer.
computer.