Installing The M.2 2230 Pcie Solid-State Drive - Dell OptiPlex 7000 Micro Service Manual

Steps
1. Remove the screw (M2x3.5) that secures the solid-state drive to the system board.
NOTE: The system has two solid-state drive slots.
2. Slide and lift the solid-state drive off the system board.

Installing the M.2 2230 PCIe solid-state drive

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation
procedure.
Removing and installing components 17