Station Hunting; Step Call; Call Waiting; To Activate Call Waiting - NEC UNIVERGE DT930 User Manual

3.
To make a call to another party or answer the
incoming call.
Replace the handset after finishing a call.
4.
The original call rings back.
Call Indicator Lamp flashes red.
Line key lamp flashes green.
5.
Lift the handset to restart a conversation.
Line key lamp lights green.

STATION HUNTING

When a busy terminal which is assigned Station
Hunting pilot number is called, this feature permits
the incoming call to be routed to another terminal
within the hunt group.
The terminal that is set the Station
Hunting feature and the pilot number
are set by system data setting at initial
installation. For details, please contact
the system administrator.
You cannot set Call Back, Call Waiting,
or Executive Override to the pilot
number of the hunt group.
1.
Lift the handset.
Line key lamp lights green.
2.
Dial the desired number.

If the pilot number is busy, the call is
routed to another terminal within the
hunting group.
3.
Start conversation with called party.

STEP CALL

This feature allows the terminal user, after calling a
busy terminal, to call an idle terminal by simply
dialing an additional digit.
The feature is set by system data
setting at initial installation. For details,
please contact the system
administrator.
1.
Lift the handset.
Line key lamp lights green.
2.
Dial the extension number.
You will receive a busy tone.
3.
Dial the last digit (0-9) of another terminal.
It is possible to select the last digit of
the extension number from 0-9
arbitrarily.

CALL WAITING

This feature allows a terminal to camp itself on to a
busy terminal.
This feature is available only for the
terminal that is set by system data
setting at initial installation. For details,
please contact the system
administrator.

TO ACTIVATE CALL WAITING

1.
Receive a busy tone.
2.
Press Transfer key.
3.
Press Soft key (CW)
You will receive a special ringback tone.

TO ANSWER CALL WAITING

1.
Call in progress.
2.
Call Waiting feature is set.
Answer key lamp flashes red.
You will receive a Call Waiting tone (three
tone bursts).
3.
Press Answer key.
The original party is placed on hold and
connected to another party who initiates Call
Waiting feature.
4.
Press Answer key again.
Return to the original party and another party
is placed on hold. (It is possible to change the
connection as many times.)
70
FEATURE OPERATION