Parts Description; Functional Description - Makita KT001G Instruction Manual

PARTS DESCRIPTION

Kettle
3
1
4
2
Fig.1
1 Spout
3 Discharge lock button
5 Handle
7 Water volume scale
9 Temperature sensor
Power supply stand
10
11
12
Fig.2
10 Carrying handle
12 Power switch
14 Temperature sensor
5
9
2 Lid
4 Open-lid button
6 Maximum line
8 Power supply connec-
tor (bottom side)
- -
13
14
15
11 Power supply
connector
13 Battery cartridge
15 Ground sensing
element
FUNCTIONAL
DESCRIPTION
CAUTION:
ance is switched off and the battery cartridge is
removed before adjusting or checking function on
the appliance.
Installing or removing battery
cartridge
6
7
CAUTION:
before installing or removing of the battery
cartridge.
8
CAUTION:
tery cartridge firmly when installing or removing
battery cartridge. Failure to hold the appliance and
the battery cartridge firmly may cause them to slip off
your hands and result in damage to the appliance and
battery cartridge and a personal injury.
To remove the battery cartridge, slide it from the
appliance while sliding the button on the front of the
cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
Fig.3
► 1. Red indicator 2. Button 3. Battery cartridge
CAUTION:
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
NOTE: Up to two battery cartridges can be installed,
although the appliance uses one battery cartridge for
operation.
6 ENGLISH
Always be sure that the appli-
Always switch off the appliance
Hold the appliance and the bat-
2
1
1
Always install the battery cartridge
Do not install the battery cartridge
3