Supported Sfp/Sfp+/Qsfp+ Transceivers - Cisco 3110 Hardware Installation Manual

Supported SFP/SFP+/QSFP+ Transceivers

See Product ID Numbers, on page 33
The SSD drive identifiers are
Figure 14: SSD
1
For More Information
• See
• See
• See the configuration guide for your software for the procedures for removing and adding an SSD from

Supported SFP/SFP+/QSFP+ Transceivers

The SFP/SFP+/QSFP+ transceiver is a bidirectional device with a transmitter and receiver in the same physical
package. It is a hot-swappable optical or electrical (copper) interface that plugs into the SFP/SFP+/QSFP+
ports on the fixed ports and the network module ports, and provides Ethernet connectivity.
Cisco Secure Firewall 3110, 3120, 3130, and 3140 Hardware Installation Guide
28
disk0:
SSD release tab
Front Panel LEDs, on page 11
Remove and Replace the SSD, on page 67
the RAID1 configuration.
for a list of the PIDs associated with the Secure Firewall 3100 SSDs.
and .
disk1:
—
for the location and description of the SSD LEDs on the front panel.
for the procedure for removing and replacing the SSD.
Overview