Front Panel Leds - Cisco 3110 Hardware Installation Manual

Overview
Note
For More Information
• See
• See
• See
• See
• See
• See

Front Panel LEDs

The following figure shows the Secure Firewall 3100 front panel LEDs.
Figure 6: Secure Firewall 3100 Front Panel LEDs
1
If power is lost between when you pushed the reset button and when the reset process is complete, the
process stops and you have to push the button again after the system powers back on.
Remove and Replace the SSD, on page 67
Install, Remove, and Replace the Network Module, on page 65
network modules.
1/10/25-Gb Network Module, on page 15
1-Gb SX/10-Gb SR/10-Gb LR/25-Gb SR/25-Gb LR Network Module with Hardware Bypass, on
page 22 for more information about the network module.
10/100/1000Base-T Network Module with Hardware Bypass, on page 20
about the network module.
40-Gb Network Module, on page 17
RJ-45 Copper Port Link Status
• Off—No link.
• Green—Link is up.
Cisco Secure Firewall 3110, 3120, 3130, and 3140 Hardware Installation Guide
for the procedure for removing a replacing the SSD.
for the procedure for installing
for more information about the network module.
for more information about the network module.
2 RJ-45 Copper Port Activity Status
• Off—No activity
• Green, flashing—The number of flashes
determines the link speed; 1 flash=10 Mb,
2=100 Mb, 3=1 Gb.

Front Panel LEDs

for more information
11