Supported Sfp/Sfp+/Qsfp+ Transceivers - Cisco 3100 Series Hardware Installation Manual

Supported SFP/SFP+/QSFP+ Transceivers

Caution
See Product ID Numbers, on page 33
Figure 14: SSD
1
For More Information
• See
• See
• See the configuration guide for your software for the procedures for removing and adding an SSD from
Supported SFP/SFP+/QSFP+ Transceivers
The SFP/SFP+/QSFP+ transceiver is a bidirectional device with a transmitter and receiver in the same physical
package. It is a hot-swappable optical or electrical (copper) interface that plugs into the SFP/SFP+/QSFP+
ports on the fixed ports and the network module ports, and provides Ethernet connectivity.
Cisco Secure Firewall 3100 Series Hardware Installation Guide
28
You cannot swap SSDs between different platforms. For example, you cannot use a 2100 series SSD in a
3100 series model.
SSD release tab
Front Panel LEDs, on page 11
Remove and Replace the SSD, on page 67
the RAID1 configuration.
for a list of the PIDs associated with the Secure Firewall 3100 SSDs.
—
for the location and description of the SSD LEDs on the front panel.
for the procedure for removing and replacing the SSD.
Overview