Casio CW-L300 User Manual page 69

Message
TOO MANY • You are trying to copy text
CHARACTERS! that contains more than 49
SOME WERE NOT characters.
➜ Decrease the number of
COPIED
characters you are copying.
TOO MANY • Pasting copied text will cause
CHARACTERS! the number of characters to
SOME WERE NOT exceed the allowable limit for
PASTED the location where you are
pasting.
➜ Re-input so the pasted text
does not cause the allowable
number of characters to be
exceeded.
TOO MANY LINES TO • Printing with a frame will
FRAME! cause your label to have
more than the allowable
number of lines.
➜ Decrease the number of lines
or change to a wider tape.
TOO MANY LINES! • You are trying to print a label
that has more than the
allowable number of lines.
➜ Decrease the number of lines
or change to a wider tape.
See page:
Cause and Action
47
47
35
23
Message
TOO SHORT TO CUT! The unused tape at the
SET/ESC beginning of a numbering label
cannot be cut or cutting
between labels is not possible.
• To print without cutting, press
SET.
After printing is complete,
use scissors to cut the labels.
• To print with auto cutting,
change the settings to
increase the margin width
(from NARROW to MEDIUM,
or from MEDIUM to WIDE).
Left and right margins can
auto cutting can be ensured
by selecting FULL CUT for
the tape cut mode and WIDE
for the margins setting.
See page:
Cause and Action
26, 38
67
E