Part 6 - Configuring The Printer Setup; Demo Printing - Casio CW-L300 User Manual

Part 6 - Configuring the Printer Setup

The printer has a SET UP screen that you can use to configure a variety of
basic settings.
■ To configure the printer setup
1.
Press to turn on the printer.
2.
Press FUNCTION and then SET UP.
3.
Use and to select the SET UP item whose setting you want to
change, and then press SET.
4.
Use the cursor keys to change it.
When this setting
is selected:
DEFAULT FONT • Use
INPUT
• Use
OVERWRITE (page 44).
CONTRAST
• Use
DENSITY
• Use
Mode.
• Use
SOUND
• Use
or off.
LANGUAGE
• Use
you want to use.
cm/inch
• Use
inches as the unit of measurement.
DEMO PRINT
• Use
Mode, and then press SET to start demo
printing.
Change its setting like this:
and to select the font (page 51).
and
to select INSERT or
and to adjust the display contrast.
and
to select DISC Mode or TAPE
and to adjust the print density setting.
and
to turn printer sound effect on
and
to select the display language
and
to select centimeters (cm) or
and
to select DISC Mode or TAPE

Demo Printing

Demo printing uses built-in data to demonstrate the type of disc printing and
tape label printing that can be performed by the printer.
Important!
• If there is label data from your last label layout session is still in memory,
performing a demo print will delete it. If you think you will need the data
later, save it in memory (page 54) before performing a demo print.
■ To perform disc demo printing
1.
Make sure an ink ribbon cassette is loaded in the printer.
• See page 11 of the Startup Guide for information about loading ink ribbon
cassettes.
2.
If the printer is on, press to turn it off.
3.
Press to turn on the printer.
4.
Press FUNCTION and then SET UP.
5.
Use and to select DEMO PRINT, and then press SET.
6.
Use and to select DISC, and then press SET.
7.
Use and to select the demo data you want to print, and then press
SET.
8.
Use and to select PRINT, and then press SET.
9.
Use and to select DISC, and then press SET.
• If you want to print a disc case label, select TAPE instead
• If you want to print a disc case label, see page 13 of the Startup Guide
for information about loading tape cartridges.
55
E