Free Design: Using Multiple Lines In A Tape Label - Casio CW-L300 User Manual

3.
Input the text for the next first block.
• Here we will input "Retail Package".
Indicates the block number where the cursor is currently located.
• To delete a block mark, move the cursor to the
press DEL. Note that you cannot delete a block mark by pressing the
BS key.
• You can have up to 16 blocks inside of a single tape label layout.
• See page 24 of the Startup Guide for information about printing the label.
• For information about saving tape label data, see page 54.
Dividing Existing Text into Blocks
You can also divide text you have already input into blocks. Simply move
the cursor to the location where you want to input a block mark, and then
press FUNCTION .
FREE DESIGN: Using Multiple Lines in a Tape
Label
This section explains how to use multiple lines in a label or a specific block in
the Free Design Mode. Note that the maximum number of lines depends on
the width of the tape you are using.
Important!
symbol, and then
• Note that the character size of the printed label will be adjusted by the printer
automatically in accordance with the tape width and the number of lines
(Auto Fit). This is true even if you specified the character size manually
(page 31).
Example
Maximum Number of Lines
Tape Width
6mm
9mm
12mm
18mm
24mm
New Branch
In Operation soon!
2
3
5
8
8
23
E