Power On Start Function - Pioneer DVD-V7400 Operating Instructions Manual

Power On Start Function

1-2
3
In the case of 1
In the case of 2
In the case of 3
Selecting the special Title and Chapter
÷ Select ENTER on the screen to save the setting and exit
the screen. Select RETURN to cancel the setting and return
to the previous screen.
ADV.SETUP page 1/2
WEEKLY TIMER OFF
POWER ON START OFF
TITLE PLAY MODE Single
REPEAT MODE OFF
BAUD RATE 4800bps
TRAY LOCK OFF
BLACKBOARD LOCK OFF
STACK MODE OSD ON
REV STEP/REV PLAY VOBU
Exit
SETUP
POWER ON START
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
ENTER RETURN
POWER ON START
1.TOP MENU
2.TITLE
TITLE 06 CHAPTER 02
3.BARCODE/COMMAND STACK
ENTER
RETURN
«
ADV.SETUP page 1/2
WEEKLY TIMER OFF
POWER ON START T06:C02
TITLE PLAY MODE Single
REPEAT MODE OFF
BAUD RATE 4800bps
TRAY LOCK OFF
BLACKBOARD LOCK OFF
STACK MODE OSD ON
REV STEP/REV PLAY VOBU
SETUP Exit
I I
.
DVD. Video CD CD
Setting the Power On Start
Function
Move the ‰ (pointer) to "POWER ON START"
1
by pressing
or
2.
Set it to ON using the
ENTER
3.
Press
÷ The POWER ON START option screen is displayed
1.TOP MENU:
Playing from the top menu screen
2.TITLE:
Playing the specified Title and Chapter
3.BARCODE/COMMAND STACK:
Recalling and executing the Barcode/Command
Stack groups in memory
÷ Select one of the above with
ENTER
press
1. Playing the top menu
÷ Move the ‰ (pointer) to 1. TOP MENU and press
2. Playing the specified Title and Chapter
÷ Move the ‰ (pointer) to 2. TITLE and press
Example: To begin playback with Chapter 2 of Title 6
0 =
A: Press
=
2 NEXT
B: Press or
ENTER
press to start setting the next
set of figures. Press either the
or to select 02 and press
NOTE
÷ When playing CDs/Video CDs, the player ignores the
Title entry and sees the Chapter as a track number.
Barcode Commands are valid for CD Barcodes only*.
You can set the POWER ON START function with
the mouse as well as with the remote control.
÷ Where
is displayed, click with the left mouse button
to change selections or settings.
÷ Clicking on a number with the left mouse button
increases the number by 1. Each time you click on a
number with the right mouse button, it decreases by 1.
*
Barcode Commands designed for CDs are acceptable. However, Barcode
Command Stacks are unavailable for CDs and Video CDs. DVD Barcode
Commands and Stack Groups function properly on the DVD-V7400.
.
or buttons
or and
ENTER
ENTER
.
= = 0 =
NEXT
6
to select 06 and
ENTER
51
En