Power On Start - Pioneer DVD-V5000 Operating Instructions Manual

09 Advanced Setup Menu
• SERIAL PORT
Set the RS-232C interface to use with a 15-pin
connector or 9-pin connector. Only a single
type of connector may be used at a time.
/
Use
alternate between 15 Pin and 9 pin (Default
setting is 15 Pin).
15 Pin:
9 Pin:
• BAUD RATE
Sets the Baud rate for the RS-232C
interface.
/
Use
alternate between 19200 bps and 9600 bps
(Default setting is 19200 bps).
• EXTEND TERMINAL
Use the Extend Terminal to select a switch-
key setting.
/
Use
alternate between Standard and User
(Default setting is Standard).
Standard: The unit responds according to
User: The user selects how the
• SYNC OUT (DURING SQ)
Use SYNC OUT to determine if a video signal
is sent when the player is not playing video.
/
Use
alternate between ON and OFF (Default
setting is OFF).
OFF:
ON:
• If the power is interruputed while saving the ADV. SETUP menu settings during
video playback and the disc is still spinning, the settings are not recoreded.
When disconnecting the power cord, always turn off the main power switch
first (the power indicator is not lit) or use the remote control to set the unit to
Standby mode (the power indicator changes to orange).
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
42
(cursor left/right) buttons to
When connecting to a PC using
a Pioneer or other brand 15-pin
to 9-pin cable.
When connecting to a PC using
a commercial 9-pin cross-cable.
(cursor left/right) buttons to
(cursor left/right) buttons to
established standard setting
(see pages 68 – 70).
external option key responds.
Press ENTER to activate this
option (see page 46).
(cursor left/right) buttons to
Video is output constantly; the
sync signal is ON.
Video is not output except
during playback and when
displaying menu screens (sync
signal is off).

Power On Start

Sets playback mode when power is turned on.
1 Press and hold HOME MENU for one
second.
The screen displays the ADV. SETUP menu.
2 Use the (cursor down) button to
select POWER ON START.
/
3 Use the (cursor left/right) buttons
to select a mode other than OFF, then
press ENTER.
When OFF is selected, Power On Start
function is disabled.
/
4 Use the (cursor up/down) buttons
to select 1, 2, or 3, then press ENTER.