Table of Contents
Advertisement
The inherent security properties of NAT are somewhat bypassed if you set up DMZ host.
We suggest you to add additional filter rules or a secondary firewall.
Click DMZ Host to open the following page:
Available settings are explained as follows:
Item
Private IP
Choose PC
Vigor130 Series User's Guide
Description
Choose Private IP or Active True IP first.
Active True IP selection is available for WAN1 only.
Enter the private IP address of the DMZ host, or click
Choose PC to select one.
Click this button and then a window will automatically pop
up, as depicted below. The window consists of a list of
private IP addresses of all hosts in your LAN network. Select
66
Advertisement
Table of Contents
