Installation; Driver - Panasonic MINAS A4P Series Instruction Manual

How to Install
Install the driver and the motor properly to avoid a breakdown or an accident.

Driver

Installation Place
1) Indoors, where the products are not subjected to rain or direct sun beams. The products are not water-
proof.
2) Where the products are not subjected to corrosive atmospheres such as hydrogen sulfide, sulfurous acid,
chlorine, ammonia, chloric gas, sulfuric gas, acid, alkaline and salt and so on, and are free from splash of
inflammable gas, grinding oil, oil mist, iron powder or chips and etc.
3) Well-ventilated and low humidity and dust-free place.
4) Vibration-free place
Environmental Conditions
Item
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Vibration
Altitude
How to Install
1) Rack-mount type. Install in vertical position, and reserve enough space around the servo driver for ventilation.
Base mount type (rear mount) is standard (A to D-frame)
2) Use the optional mounting bracket when you want to change the mounting face.
A to D-frame
MADD
MBDD
MCDD
MDDD
E and F-frame
22
Less than 90% RH (free from condensation)
Less than 90% RH (free from condensation)
Lower than 5.9m/S
Fastening torque of earth screws (M4) to be 0.39 to 0.59N
Mounting bracket
Condition
0˚C to 55˚C (free from freezing)
–20˚C to 80˚C (free from freezing)
2 (0.6G), 10 to 60Hz
Lower than 1000m
e.g.) In case of C-frame
Mounting bracket
(optional parts)
m.
•