Honeywell CIPer 50 Installation & Commissioning Instructions page 64

CIPer MODEL 50 CONTROLLER – INSTALLATION AND COMMISSIONING INSTRUCTIONS
TM
To can make up your own RJ-45 to conventional to RS-232 DB-9 female connecting cable using a
standard Ethernet cable with the one end cut off. The standard color codes are:
NOTE
TECHTOO USB 3.0 to Serial Adapter USB RS232 Cable USB
Serial Cable Converter DB9 USB (10ft) with FTDI Chipset Gold
Plated for
Win10/8.1/8/7/Vista/XP/2000/Android/Linux/Mac OS
X10.6 & Above.
YIOVVOM DB9 Breakout Connector to Wiring Terminal RS232
D-SUB Male Serial Adapters Port Breakout Board Solder-Free
Module with case (Female Serial Adapter).
31-00233-02
Pin 2 / RxD (receive data) = Orange
▪
Pin 3 / TxD (transmit data) = White/Green
▪
stripe
Pin 5 / GND = White/Blue Stripe
▪
For proper serial communication:
Tx on your host (laptop) must go to Rx on the
CIPer50
Tx on the CIPer50 must connect to Rx on your host
so your Wire PIN 2 <> PIN 3 and PIN 3 <> PIN 2.
At the RS-232 DB-9 female connection:
•
Orange > DB-9 pin 3
•
White/Green > DB-9 Pin 2
• White/Blue > DB-9 Pin 5
64