Connecting The Drain Hose - Black & Decker BDFH44M Instruction Manual

INSTALLATION INSTRUCTIONS

CONNECTING THE DRAIN HOSE

51" Drain hose extender
1. Disconnect the drain hose from the water tank by pulling it out (To assure water
tightness, there is tension between the hose and the inflow and therefore an
increased force is required for removal).
2. Remove the drain hose from the bracket on the back of the unit.
3. Insert the drain hose into the connector. Connect the drain hose extender to the
other side of the connector.
4. Allow the hose to drain into a sink or basin. (Should not exceed a height of 32"
or it could flow into a drain on the floor).
Page 28
1
Make sure the hose is not
bent or kinked.
Connector
Drain
External
hose
drain
hose
3
Back of water tank
Drain hose
Drain hose connector
2
x x