Leveling The Dryer - Black & Decker BDFH44M Instruction Manual

INSTALLATION INSTRUCTIONS

Leveling the Dryer

To ensure that the dryer provides optimal drying performance, it must be leveled.
To minimize vibration, noise, and unwanted movement, the floor must be a perfectly
level, solid surface.
Adjust the leveling legs only as much as necessary to level the dryer. Extending the
leveling legs more than necessary can cause the dryer to vibrate.
The leveling legs can be adjusted by turning them to raise or lower the leg with an
adjustable wrench (not included).
After positioning the unit at its final location, it should not rock when pressing down
on the top corners of the unit. A leveler can also be used. If the unit is not stable, the
leveling legs should be adjusted to stabilize.
Before Starting the Dryer
Make sure all electrical connections are complete. Plug in your dryer. Make sure the
dryer is plugged into an electrical outlet and is properly grounded. The dryer should
be leveled and is sitting firmly on the floor.
Start the dryer to confirm that it runs, heats, and shuts off.
Page 27