Cleaning And Maintenance - Black & Decker BDFH44M Instruction Manual

SET UP & USE
WARNING
To reduce the risk of fire or explosion, do not dry items that have been previously
cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other
flammable or explosive substances. They emit vapors that could ignite or explode.
Any material that has been in contact with cleaning solvents or flammable liquids or
solids should not be placed in the dryer until all traces of these flammable liquids or
solids and their fumes have been removed. There are many highly flammable items
used in homes, such as acetone, denatured alcohol, gasoline, kerosene, some liquid
household cleaners, some spot removers, turpentine, waxes, and wax removers.
Do not dry items containing foam rubber (may be labeled latex foam) or similarly
textured rubber-like materials on a heat setting. Heated foam rubber materials can,
under certain circumstances, produce fire by spontaneous combustion.
Sorting and Loading
• Always follow fabric manufacturer's care label.
• If using fabric softener or other products to eliminate static, follow all instructions
on the product package. Improper use may cause stains.
• Do not overload. Overloading restricts tumbling action, resulting in uneven
drying as well as excessive wrinkling of some fabrics. The drum should not be
loaded more than ½ full.
• Mixed loads of heavy and light weight fabrics will dry differently, which may
result in lightweight fabrics being dry while heavy fabrics remain damp at the
end of a drying cycle. Add one or more similarly sized items to your dryer when
only one or two articles of clothing need drying. This improves the tumbling
action and drying efficiency.
• Small articles or items that can be tangled, can be dried in a laundry bag.
• Items with buttons should be buttoned up. Items with zippers should be zipped
up. These items should be turned inside out to dry.

CLEANING AND MAINTENANCE

WARNING
Unplug the power cord before cleaning any part of the unit. The dryer should be
cleaned regularly. Failure to maintain the unit in a clean condition could lead to
deterioration of the surface which could adversely affect the life of the appliance.
Do not use harsh chemicals or solvents on any part of the machine or pour water or
cleaner directly on it.
Cleaning the Exterior
Clean with a soft, damp cloth or a mild soap and water solution. Do not use abrasive
powders or pads. Do not spray cleaners directly onto the control panel.
Cleaning the Drum
Use a damp cloth with a mild non-abrasive cleaner suitable for stainless steel and
anodized surfaces. Remove the cleaner residue and dry with a clean cloth.
Page 12