Full Factory Reset The Computer; Repairs; Maintenance; Clean The Computer - Honeywell CT40 User Manual

Full Factory Reset the Computer

1. Swipe up from the bottom of the Home screen to access all apps.
2. Select Settings
3. Tap Erase all data (factory reset).
4. Tap Erase data.
5. If prompted, type your screen lock security pattern, PIN, or password and tap
6. Tap Erase data. A message appears informing you an Enterprise data reset is

Repairs

Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center (see
page ix).

Maintenance

Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following sections describe
periodic checks to ensure dependable operation.

Clean the Computer

The computer housing, scanner window, camera window and touch screen may be
cleaned with a soft cloth dampened with water or a mild detergent-water solution.
If a mild detergent solution is used, wipe the computer with a clean cloth
dampened only with water to remove any detergent residue.
Note: Reading performance may degrade if the scanner window is not clean. If the window
is visibly dirty, or if the scanner is not operating well, clean the window.
Caution: Do not submerge the computer in water or cleaning solution.
Caution: Ensure all components are dry prior to mating the computer
CT40/CT40 XP Mobile Computer Series User Guide
next ( ).
being performed.
Do not use abrasive wipes or cloths on the windows and touch
screen. Abrasive wipes may scratch the windows and touch
screen. Never use solvents (e.g., acetone) on the housing or
window. Solvents may damage the computer finish, the
windows or touch screen.
with charging accessories or other peripheral devices. Mating
wet components may cause damage not covered by the
warranty.
> System > Advanced > Reset options.
Customer Support on
95